F510 & F525 Blower Housing and Flywheel – REMOVE AND INSTALL FLYWHEEL

1. Remove ignition coil. (See Remove and Install Armature With Coil in Section 40, Group 15.)
2. Hold flywheel and remove nut.
3. Remove bracket (A).
4. Remove flywheel using a flywheel puller.
5. Install flywheel and bracket.
6. Install nut. Tighten nut to specifications.
7. Install and adjust ignition coil.
FLYWHEEL NUT TORQUE SPECIFICATIONS
PA420A . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 137 N·m (101 lb-ft)
PA540A . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 172 N·m (127 lb-ft)

31. May 2021 by samuel07042012
Categories: F510-F525 | Leave a comment

Leave a Reply

Required fields are marked *