F510 & F525 Cylinder Block – REPLACE BALANCER BUSHINGS-PA420A/PA540A-AS00, BS00, AS01 AND AS02

NOTE: Remove bushings with a bearing driver or a press.
Remove link rod bushings with oil groove side facing up.
1. Remove bushings.
2. Install link rod bushings with seam (A) at a 90 ̊ angle to centerline (C).
NOTE: Install bushing from opposite side of oil grooves (B).
3. Install bushing below surface to a depth of 1.00 mm (0.040 in.) (D).

4. Align oil passage (A) in bushing and oil passage (B) in weight. Install bushing.
5. Install bushing below surface to a depth of 0.50 mm (0.020 in.) (C).

05. June 2021 by samuel07042012
Categories: F510-F525 | Leave a comment

Leave a Reply

Required fields are marked *