F510 & F525 Mower Deck – REMOVE AND INSTALL SPINDLES ASSEMBLIES

NOTE: Early model F510 (38-Inch) Mower shown. Other models similar.
1. Remove mower deck.
2. Disconnect lever (A).
3. Remove cover (B).

CAUTION: Wear gloves when handling blade to avoid injury.
4. Remove blade.
5. Remove spindle assembly (C).
6. Install spindle assembly. Tighten nuts to 25 N·m (221 lb-in.).

CAUTION: Wear gloves when handling blade to avoid injury.

7. Install blade with concave side of washer facing blade.
Tighten cap screw to specifications.
8. Install cover.
9. Connect lever.

03. August 2021 by samuel07042012
Categories: F510-F525 | Leave a comment

Leave a Reply

Required fields are marked *