F510 & F525 – RIGHT FENDER—FENDER REPLACEMENT

1. Remove cap screws (A).
2. Remove knobs (B).
3. Remove console (C).
4. Remove lever (D).
5. Disconnect throttle cable at carburetor.
6. Disconnect bracket assembly.
7. Replace fender.
8. Close rear shroud and align fender with shroud.
9. Connect bracket assembly and throttle cable.
10. Install lever (D), console (C) and knobs (B).
11. Install cap screws (A).
12. Adjust throttle cable. (See Throttle Cable Adjustment
in Section 220, Group 15.)
A—Cap screws
B—Brake and Throttle Knobs
C—Console
D—Park Brake Lever

26. August 2021 by samuel07042012
Categories: F510-F525 | Leave a comment

Leave a Reply

Required fields are marked *