F510 & F525 – RIGHT FENDER—SERVICE REMOVAL

1. Disconnect throttle cable at carburetor.
2. Remove cap screws. (See Fender Replacement in this group.)
3. Disconnect wire harness at (A), (B) and (C).
4. Disconnect lever (D).
5. Position fender away from service area.
6. Install fender.
7. Connect lever (D).
8. Connect wire harness at (A), (B) and (C).
9. Install cap screws. (See Fender Replacement in this group.)
A—Fuel Solenoid Connector
B—Oil Switch Terminal
C—PTO Connector
D—Park Brake Lever

26. August 2021 by samuel07042012
Categories: F510-F525 | Leave a comment

Leave a Reply

Required fields are marked *