F510 & F525 Transmission – DISASSEMBLE DIFFERENTIAL

NOTE: For PA420A/PA540A-AS01, BS00 and AS02, the differential is serviced as an assembly only.
1. Remove axle housing (A).

2. Remove differential case (A) from housing.
3. Remove cover (B) from case.
4. Remove washer (C) and gear (D).
5. If seal (E) must be replaced, remove axle assembly.
(See Remove and Install Axle Assemblies in this group.)
A—Differential Case
B—Differential Cover
C—Thrust Washer
D—Bevel Gear
E—Seal

6. Remove shaft (A).
7. Remove pinion gears (B) and bevel gear (C).

29. June 2021 by samuel07042012
Categories: F510-F525 | Leave a comment

Leave a Reply

Required fields are marked *