F510 & F525 Fuel Tank – REMOVE AND INSTALL FUEL TANK

NOTE: Fender removed for photo clarity only.
1. Turn fuel shutoff valve (B) to OFF position.
2. Disconnect fuel hose (C). Drain fuel into a suitable container.
3. Disconnect sensor (A).
4. Remove fuel tank cap.
5. Remove nuts and washers (D) and (E).
6. Remove fuel tank.
7. Install fuel tank and cap.
8. Install nuts and washers.
9. Connect fuel hose.
10. Connect sensor.
11. Turn fuel shutoff valve to open position.

07. June 2021 by samuel07042012
Categories: F510-F525 | Leave a comment

Leave a Reply

Required fields are marked *