F510 & F525 Ignition and Charging System – ADJUST ARMATURE AIR GAP

1. Turn flywheel magnet away from armature.
2. Insert 0.30 mm (0.012 in.) feeler gauge, between flywheel and armature.
3. Push armature against flywheel and tighten screws (A) to 3 N·m (30 lb-in.).
4. Turn flywheel to remove feeler gauge.

08. June 2021 by samuel07042012
Categories: F510-F525 | Leave a comment

Leave a Reply

Required fields are marked *