F510 & F525 STEERING REPAIR – INSPECT STEERING SHAFT AND GEARS

1. Inspect bushings (A) for wear.
2. Inspect gears (B) and (C) for cracks, damage or wear.
3. Inspect arm (D) spline for damage.
4. Inspect plate (E) for cracks or damage.
5. Replace any worn or damaged parts.
6. Tighten draglink rod to ball joint nut to 34 N·m (25 lb-ft).
A—Bushing
B—Sector Gear
C—Pinion Gear
D—Steering Arm
E—Gear Plate

05. July 2021 by samuel07042012
Categories: F510-F525 | Leave a comment

Leave a Reply

Required fields are marked *