F510 & F525 STEERING REPAIR – INSTALL STEERING SHAFT AND GEARS

1. Install gear assembly.
2. Install bracket (E) on frame.
3. Adjust cap screw (D) for proper spring tension.
4. Attach foot rest (C).
5. Connect drag link (B). Tighten ball joint to steering arm nut to 37 N·m (27 lb-ft).
6. Install bushing (A) and cotter pin.
A—Bushing
B—Drag Link
C—Foot Rest
D—Cap Screw
E—Bracket
F—Steering Arm
G—Sector Gear
H—Bushing

7. Install shaft assembly. Align marks (B) on gears. With marks aligned, sector shaft arm should be at 90 ̊ left.
8. Install washers and cotter pin (A).

9. Install pedestal (C).
10. Connect indicator lights (B) and panel (A).
11. Install steering wheel.
12. Connect battery negative cable.

03. August 2021 by samuel07042012
Categories: F510-F525 | Leave a comment

Leave a Reply

Required fields are marked *